Common Issues & Solutions
| Regular Protocol 1 and 2 Fault Codes | ||
| Fault Code | Name | |
| E001 | Controller failure | |
| E002 | communication failure | |
| E003 | Motor Hall sensor failure | |
| E004 | Twist grip fault | |
| E005 | Brake lever fault | |
| E006 | Motor phase loss | |
| Custom Protocol 2(LKLS) Error Code | ||
| Error Code | Status Meaning | Solution |
| Error05 | Brake fault | Check if brake lever resets properly; replace brake lever if faulty. |
| Error06 | Battery under voltage | Recharge the battery. |
| Error07 | Motor fault | Check for loose power wires and motor damage. |
| Error08 | Twist grip fault | Check twist grip reset and wiring connection; replace twist grip if abnormal. |
| Error09 | Controller fault | Check Hall wire connection of controller. |
| Error10 | Communication receive fault | Check proper connection of instrument cable. |
| Error11 | Communication transmit fault | Check proper connection of instrument cable. |
| 5S/KDS/J Protocol Fault Code | ||
| E21 | Abnormal Current | |
| E22 | Twist grip fault | |
| E23 | Motor phase loss | |
| E24 | Motor Hall sensor fault | |
| E25 | Brake fault | |
| E30 | Communication Fault | |
